Service and Maintenance

Below you will find general safety and maintenance guidelines for the products we offer.
In addition to the information provided here, all users should carefully read and understand
the owner’s manual as well as all warning, safety, and maintenance labels supplied with each machine.
Failure to follow these instructions may result in serious injury.

Please retain all owner’s manuals and ensure that all warning labels remain legible and intact.
Replacement manuals and labels can be obtained directly from the manufacturer.

If you have any questions regarding the installation, operation, or maintenance of any product,
please contact us at info@seleventh.com.

General Safety Rules

Using fitness equipment involves an inherent risk. To minimize the risk of injury, please observe the following guidelines:

• Inspect all equipment before each workout.
• Ensure that all nuts, bolts, screws, and pop pins are properly installed and fully tightened.
• Inspect cables for signs of wear and replace damaged components immediately.
• Never use equipment if any part is damaged or missing.
• Keep clear of cables and moving parts during operation.
• Ensure all snap links are fully closed when performing cable, pulley, or strap exercises.
• Perform all exercises using smooth and controlled movements.
• Do not allow children or minors to play on or around the equipment.
• Whenever possible, exercise with a training partner.
• Consult your physician before beginning any exercise program.
• Do not start any exercise program without proper instruction.

Safe use of fitness equipment requires strict adherence to the manufacturer’s instructions,
warnings, and maintenance recommendations. Routine inspection and maintenance are essential
to ensure optimal safety and performance.

Even when high-quality materials are used, normal wear is inevitable.
A warranty does not replace the owner’s responsibility to inspect the equipment regularly.
Potentially dangerous conditions may arise even during the warranty period.

Owner Responsibilities

• Provide adequate supervision to all users.
• Ensure all users are instructed in proper equipment use.
• Ensure supervisors and personal trainers are properly trained.
• Ensure trainers provide accurate guidance on strength training fundamentals.

Maintenance Guidelines for Equipment Components

Cables

• Run your fingers along the cables to detect thinning or bulging areas.
• Replace cables immediately at the first sign of wear or damage.
• Inspect for fraying, cracking, peeling, or discoloration.
• Check cable tension and adjust if necessary.
• Ensure the jam nut on the selector rod top bolt is secure.

Upholstery

• Clean periodically using mild soap or a vinyl upholstery cleaner.
• Avoid abrasive cleaners not intended for vinyl surfaces.
• Keep sharp objects away from upholstery.

Nuts and Bolts

• Inspect periodically and tighten as necessary.
• Perform a complete re-tightening sequence at regular intervals.

Guide Rods

• Clean with a lint-free cloth.
• Lubricate using a silicone- or Teflon-based lubricant.

Springs, Pins, and Knobs

• Inspect for visible wear or damage.
• Check springs in snap links and pop pins for proper tension and alignment.
• Replace any spring that sticks or has lost tension.

Anti-Skid Surfaces

• Replace if worn or slippery.

Warning Labels

• Inspect regularly and ensure all labels remain legible and intact.